SLIDECOVER® sliding tarpaulin system on cables

Description

The SLIDECOVER® is custom-made according to the dimensions of the container to be covered.

It consists of 4 corners to be welded in the corners of the container, and 2 cables to be stretched on the sides of the container between the corners.

Tarpaulin version: 

• TARPLINE® 600 tarpaulin for the SLIDECOVER® sliding cover system, made with 8 PVC sleeves, a metal attachment, eyelets, bungee cords, and loops.
• Custom-made according to the volume and dimensions of the container.
• The tarpaulin is equipped with gussets every 0.8m, which include support bars to bear the weight of the tarpaulin in case of rain.
• We recommend using the waterproof tarpaulin for waste that should not come into contact with water, such as paper, cardboard, wood, and green waste.

Net version: 

• NETLINE® SUP net for the SLIDECOVER® sliding cover system, made with flaps, reinforcements, and a special cut that allows the net to slide on cables positioned on either side of the container, like a curtain, controlled by a rope by the driver.
• Custom-made according to the volume and dimensions of the container.

Accessories: 

• Steel tubes with shackles
• AluminumAluminium tube
• Square steel tube for welding
• Steel corners for welding
• Galvanized steel cables with threaded rods
• Pulling rope with a 10mm caracontainerer
• Steel rope guide
• Tension ratchets
• OPTION: 2 fixing cleats for the rope
• + 1 standard assembly instructionsmanual

Please note that we recommend driving with the system closed and securely fastened in case of bad weather, so that water slides off the tarpaulin and prevents it from stagnating.

This sliding cover system on cables can be installed by yourself or by our installation team.